1. Can not adjust the water strength of shower room jets
Check the valve of electrical motor or air pipe.
Following are some notes for you while checking:
Is the electric motor broken?
Is the air pipe leaking or loosing?
Is the connect pip loosing?
Is the pumpatic valve broken?
Is it loosing between pumpatic valve and pipe?
Does the plastic valve blocked?
Does the air pip blocked?
2.Pipe leakage:
Following are some notes for you:
Are connections lossing?
Are cold and hot water faucet loosing?
Is the valve core in the wrong position?
3.Steam machine leakage
Possible causes:
Generally speaking, it is caused by wrong way of installing. Please follow the instruction carefuly when install shower rooms.
3.1. leaking after turn off power of shower room steam machine:
Is the pipe broken?
Is the pipe connection too tight or too loose?
Is that any problem in your house water pipe?
3.2. Leaking while using the shower room steam.
Please check the water tank of steam machine.
Is the steam and water tank connection broken?
Does the outlet of steam installed in the right way?
3.3. Leaking while using the shower room jets
Make sure your steam machine is seal enough?
Check whether the glass door is seal enough .
See if the seal of pumpatic switch is good enough.
Find out whether the electromagnetic valve installed in the right position.
There are many other problems you may faced while installing or using, please contact the technical part of Just Sanitary ware to find out your solution.
